Turn it into a swallow ;)
Long story short stacked in on a rail and was wondering if I could fix this and how so?
Turn it into a swallow ;)
Drill a small hole at the end of the crack to stop it from spreading, fill with ptex, clamp and scrape. If you’re hitting rails a bunch, a tail bump isn’t going to be noticeable.
It's not great, will likely continue to degrade if water gets in. I'd try to inject some epoxy and clamp the shit out of it. May never be perfect but could probably remain functional.
This. Use G-Flex Marine epoxy
it's not great. but not the end. like others have said, p-tex and clamp and it'll survive and thrive
It's just the tip/tail right? Cut out a bit so the crack doesn't spread. Epoxy the whole thing shut. It'll live for a bit. As far as places on the board for this to happen go, this is about the best spot. If you need a powder board the suggestion to turn it into a swallow is the best one.
Yes just the tip of the tail
The tail is where your edge connects. It's least likely to blow out. I'd throw in some jb weld and clamp it, send it
LOL cute boo boo
Michael Schumacher has more chance of full repair
This is basically like a broken fingernail. Not a big deal at all but worth cleaning up so it doesn't get worse. You really don't need an edge there, as seen by brands like GNU/Lib Tech. If you left it, your edge could possibly keep coming out like a zipper. So you could do a couple things. (Recommended) Take a hacksaw and cut the section of edge that is bent and fill the gap with epoxy. If you want it to look nice, place tape around the gap/craxk to keep epoxy off the base and topsheet, then add epoxy, and clamp. Or, you can try to pry apart the edge a bit to get more epoxy inside, maybe try to straighten the edge a bit, and clamp it all back in place in hopes that it doesn't pull itself apart again.
Its both cooked and repairable
this is the answer. you can do a DIY repair and get more time out of it, a progessional repair that will probably be over $100 bucks, or invest that $100 into another board. the used market for snowboards is usually pretty rad if you know what you are looking for
marine epoxy, clamp, send it. Inconsequential. The tip and that tail are not very important to how a board rides