SubRead ile Reddit argosu öğrenebilir miyim?

Evet. Sakin okuyucu: thread aç, ifade seç, açıklama al, kart olarak kaydet.

Kısa paketler (zaman, hedging, argo, tepkiler) Reddit’teki gibi — sonra Iggy’ye sor.

ESL / orta seviye için uygun mu?

Evet: kitap diyalogları yerine gerçek post ve yorumlar; ton veya argo belirsizse yapay zekâ.

Okumak için değil. Kart, favori, Iggy sohbeti ve profil için giriş yap.

r/YouShouldKnow · u/hakai-time1 Ağu 2026 14:35

YSK: before unplugging a desk, tv, or router setup, label both ends of every cable and take one photo of the ports

use masking tape and give each connection a number: 1 on the cable, 1 beside the port, then 2, 3, etc. the photo is backup for weird ports and power bricks that all look the same.

this takes maybe two mins before a move, repair, or deep clean and saves the dumb guessing game when everything goes back together.

Why YSK: a cable label is only useful if you know both what the cable is and exactly where it came from. marking both ends plus keeping one photo makes rebuilding the setup faster and avoids mixing up similar-looking cables or adapters.

112

Yorumlar

u/makawakatakanaka91 Ağu 2026 14:38
Or do what I do. Rip everything out and throw the cables in a pile, then get pissed off because it take 30 minutes to set back up
- u/Qwerkie_11 Ağu 2026 14:43
  This is the way. Especially if you start with the intention of cleaning it up but get sick of it half way through so you end up just shoving the cords wherever they’ll fit again
- u/axw355511 Ağu 2026 14:55
  Genuinely - why would it take 30 minutes when so many leads are standardised? A kettle lead is a kettle lead, a HDMI is a HDMI. Unless you're using some very odd connectors, even ripping everything out (which is what I do and have always done) takes like 5 minutes to set back up.
  - u/[deleted]11 Ağu 2026 15:04
  - u/RoryIsNotACabbage11 Ağu 2026 15:05
  - u/makawakatakanaka11 Ağu 2026 15:16
u/holy-crap-screw-you601 Ağu 2026 14:38
Dumb ysk
- u/QuitWhinging31 Ağu 2026 15:04
  "duh-uhhhh why this no work??!" *me pushing an Ethernet cord against a USB port for half an hour because it's not labeled and photographed* Wow, if only I'd seen this ysk sooner.
u/c9belayer-61 Ağu 2026 14:38
It took me years to learn this.
- u/Kostelnik91 Ağu 2026 14:41
  It really shouldn’t have
u/clothanger271 Ağu 2026 14:40
The "Why YSK" part of this post is literally "if you don't plug things correctly, they won't work correctly". What's next? Your TV turns off if you press the Power button ...
- u/JrdnRgrs71 Ağu 2026 14:45
  That part kinda screams AI post to me. Surprised OP didn’t say “if anyone has any questions I’m happy to answer in the comments”
  - u/SatoOppai11 Ağu 2026 14:48
- u/FernandoAlonso6611 Ağu 2026 16:00
  honestly most people forget cable layouts, this saves a ton of frustration later
u/[deleted]11 Ağu 2026 14:44
[removed]
u/kikisaurus151 Ağu 2026 14:45
They teach you how to do this in preschool. Match the shape to the hole that’s the same shape as the object you’re sticking in the hole.
- u/axw355511 Ağu 2026 14:56
  Yeah. For 99% of people, this is a nothing burger of an issue. Like, if you're doing a commercial server cabinet and need to make sure that the port for wall socket 24 connects back to the same place, sure, document the living crap out of it. But for home setups? Utter waste of time.
u/SterlingNano231 Ağu 2026 14:45
"Damn, if only I remembered what port the ethernet cable goes into....is it the HDMI port? No.....Is it the DVI port? No..."
u/SatoOppai121 Ağu 2026 14:45
The square goes in the square hole, and so on. Come on now.
u/axw355541 Ağu 2026 14:53
What cables are you using that are so obscure you can't distinguish "power lead, USB lead, HDMI, display port"? I've done computer stuff around home and work since I was like 7, so over 30 years at this point. The greatest struggle I have ever had was "oh, the HDMI is one way and I have it backwards" which I fixed in like 25 seconds. Way less time than masking, labelling, and photographing everything, even with your 2 minute estimate. I get it if you're dismantling a clock, doing a commercial server cabinated, or maybe even taking a whole computer apart, though even the computer internals are pretty standardised these days. But for your average desk/tv/router... my router has a power lead, a lead to go out to the ISP, and 4 ethernets, which can go in an combination. My entire gaming setup including monitors, keyboard, mouse, etc. 10, maybe 12 leads, and they're all either interchangeable (power leads, displayport leads, USB connectors), singular (ethernet) or attached to the thing they belong to (keyboard, speakers).
u/Lancer42021 Ağu 2026 14:53
Braindead shit.
u/Serious-Dinner-399311 Ağu 2026 17:20
Labeling cables sounds tedious but it's saved me so much frustration during moves. The photo tip is brilliant, I always forget which port was which.
u/These_Cut663611 Ağu 2026 17:24
Looks like you've got a great system figured out there, labeling both ends keeps the whole process from turning into a frustrating puzzle later on.